|
|
Math
Posts: 108
Location: Henry Clay | Trying to set up Navigator with new computer.....Need to use the ethernet to usb adapter instead of plugging straight in to ethernet. Can't get it to find the access point this way..... Any ideas? |
|
|
|
Math
Posts: 119
Location: Henry Clay | I don't know if this will help but there is a reset button on the access point. Get a paper clip and put it in the little hole and hold it in for about 5 seconds. Bryson did this a couple of times and it worked. |
|
|
|
Math
Location: Retired FCPS, Current UK and Transy | make sure your adapter is ok. Many navigators were sent out with bad adapters. When you plug it i you should get the led light to turn green. |
|
|
|
Math
Posts: 281
Location: Henry Clay | I mentioned this on email, but Remove the Navigator Programs on your computer and then Reload them and you will be asked about using the Adapter or not during the installation process. |
|
|
|
Math
Posts: 108
Location: Henry Clay | Thanks everybody. Got it working finally!! |
|
|