Navigator Help!!
mdmdavis
Posted 1/3/2007 4:35 PM (#1463)
Subject: Navigator Help!!
Math

Posts: 108
100
Location: Henry Clay		Trying to set up Navigator with new computer.....Need to use the ethernet to usb adapter instead of plugging straight in to ethernet. Can't get it to find the access point this way..... Any ideas?
dhays
Posted 1/3/2007 8:02 PM (#1464 - in reply to #1463)
Subject: RE: Navigator Help!!
Math

Posts: 119
100
Location: Henry Clay		I don't know if this will help but there is a reset button on the access point. Get a paper clip and put it in the little hole and hold it in for about 5 seconds. Bryson did this a couple of times and it worked.
rtallent
Posted 1/3/2007 8:35 PM (#1465 - in reply to #1463)
Subject: RE: Navigator Help!!
Math

1001001002525
Location: Retired FCPS, Current UK and Transy		make sure your adapter is ok. Many navigators were sent out with bad adapters. When you plug it i you should get the led light to turn green.
bperry
Posted 1/3/2007 11:45 PM (#1466 - in reply to #1463)
Subject: RE: Navigator Help!!


Math

Posts: 281
100100252525
Location: Henry Clay		I mentioned this on email, but Remove the Navigator Programs on your computer and then Reload them and you will be asked about using the Adapter or not during the installation process.
mdmdavis
Posted 1/5/2007 3:47 PM (#1471 - in reply to #1463)
Subject: RE: Navigator Help!!
Math

Posts: 108
100
Location: Henry Clay		Thanks everybody. Got it working finally!!